Pitch-Up Motion Mechanism With Heat Welding by Soft Inflatable Growing Robot

Soft growing robots have recently attracted considerable interest. They are expected to operate in complicated environments leveraging their flexibility and adaptability. However, some of them are unable to maintain their bending shape without contact with an object, and some of their mechanisms are complex. In this article, we propose a novel heat welding mechanism for pitch-up motion without any support. The proposed robot uses a gusset folded tube and welds its gusset parts. The welded tube is bent, and the robot performs a pitch-up motion. In addition, we experimentally investigate the characteristics of welded bending tubes and develop a stiffness model and bending angle model. The results demonstrate that they depend on the tube diameter, weld shape, and inner pressure. We conducted experiments to evaluate the performance of the robot and confirmed that the maximum bending moment based on which the robot can maintain its bending shape increases under a higher inner pressure, and a large bending angle is obtained by continuous bending. Further, we confirmed that proposed models can adequately simulate the pitch-up motion of the robot. The proposed mechanism enables the robot to perform novel pitch-up motion and expands the application of growing robots.