A Comprehensive Short-Circuit Protection Scheme for Series-Connected SiC MOSFETs

Series connection of devices is an effective way to achieve higher blocking voltage. SiC MOSFETs exhibit narrow short-circuit withstand time and generally much lower short-circuit robustness than silicon IGBTs. This puts a critical concern on their utilization, further stressing the importance of reliable protection. A complete short-circuit protection should be implemented to improve the reliability. In this article, a systematic short-circuit analysis methodology is proposed. Following this methodology, all the possible fault scenarios can be derived. Besides the traditional short-circuit scenarios, some unique short-circuit faults, such as a single device short- or open- circuit, have been found in series-connected SiC MOSFETs. These unique faults may not cause overcurrent, which means the traditional overcurrent-based protection is not applicable. This article proposes a method combining drain-source voltage logic signal and gate signal to comprehensively detect both classic short-circuit scenarios and unique fault scenarios. Another different point in series-connected devices is that the soft turn-off should be synchronized for each serial device to prevent excessive voltage unbalancing. The proposed short-circuit protection scheme is evaluated under each short-circuit scenario. The experimental results demonstrate that the proposed protection scheme can successfully protect the serial devices from further destruction within 500 ns for all short-circuit scenarios.