Low-Frequency-Drop of Electroabsorption Modulated Lasers and the Improvement With Partially Corrugated Grating Based DFB Lasers

Electroabsorption modulated lasers (EMLs) is sensitive to the residual facet reflection (RFR), which can cause a low-frequency drop (LFD) in the modulation response. The LFD may result in output waveform distortion, especially for high-data rate and multi-level modulation. We verify by simulation and experiments that the effect of LFD on the EML performance and propose to use LFD as one of the key performance indices for qualifying EMLs in high-speed optical transceivers. LFD can be suppressed by incorporating partial-corrugated-grating (PCG) in the laser section. With PCG-DFB structure, the EMLs can maintain high single-mode yield (SMY) and an excellent quality factor even with a strong modulator reflection from EAM section. This provides the robustness in applying the PCG-DFB to achieve a flat intensity modulation response or to enhance the output waveform under large signal modulation. By designing the PCG-EML to have about 60% of grating region, it can reach >80% of SMY and improve the average Q-value from the reduced LFD in the modulation response. The PCG-EML with reduced LFD can enhance the eye-opening through reduced waveform undershoot and overshoot for transmitting 56-Gbaud/s or beyond PAM-4 signals.