An Energy Shaping Exoskeleton Controller for Human Strength Amplification

In this work, we introduce a novel approach to assistive exoskeleton (or powered orthosis) control which avoids needing task and gait phase information. Our approach is based on directly designing the Hamiltonian dynamics of the target closed-loop behavior, shaping the energy of the human and the robot. Relative to previous energy shaping controllers for assistive exoskeletons, we introduce ground reaction force and torque information into the target behavior definition, reformulate the kinematics so as to avoid explicit matching conditions due to under-actuation, and avoid the need to switch between swing and stance energy shapes. Our controller introduces new states into the target Hamiltonian energy that represent a virtual second leg that is connected to the physical leg using virtual springs. The impulse the human imparts to the physical leg is amplified and applied to the virtual leg, but the ground reaction force acts only on the physical leg. A state transformation allows the proposed control to be available using only encoders, an IMU, and ground reaction force sensors. We prove that this controller is stable and passive when acted on by the ground reaction force and demonstrate the controller’s strength amplifying behavior in a simulation. A linear analysis based on small signal assumptions allows us to explain the relationship between our tuning parameters and the frequency domain amplification bandwidth.