Analysis, Design, and Optimization of the IPT System With LC Filter Rectifier Featuring High Efficiency

Passive diode bridge rectifier with LC filter is widely used in wireless power transfer (WPT) system due to its simple structure and uncontrolled characteristics. However, as the load resistance decreases, its input phase angle will also decrease rapidly until it shows obvious capacitive. Therefore, a novel rectifier topology with an input-series inductor (hereafter called ISIR) is proposed in this article to solve this problem. What is more, the ISIR can avoid the duty cycle loss and improve the dc–dc efficiency. First, the mechanism of ISIR is analyzed in detail combined with the operating status of topology. Then, the inductance and compensation parameters are determined based on theoretical calculation and simulation results. Finally, a prototype with a maximum load of 7 Ω is built to validate the feasibility and effectiveness of ISIR, and 88% efficiency is achieved under this condition. Compared with the traditional method, it has increased by 1.05%. The maximum efficiency of WPT system is as high as 91.14% with the proposed ISIR.