Security Crypto Display that Information Disappears and Appears According to a Certain Temperature and Time

Security displays will be one of the important technologies of the future. So we were able to find a way during the study of displays using polarization. Emission of circularly polarized (CP) light has attracted great attention for improving device performance. The degree of CP emission is defined by the dissymmetric factor,
$(q=2(I_{\mathrm{L}}-I_{\mathrm{R}})/(I_{\mathrm{L}}+I_{\mathrm{R}})$
, where
$I_{\mathrm{L}}$
and
$I_{\mathrm{R}}$
denote the intensities of left-handed and right-handed CP light, respectively. Especially, high degree of CP emission was achieved in a helical configuration of mesogenic luminophore by doping a chiral agent [15] or by rubbing two different surfaces [16]. In this work, we investigate the dissymmetric factor of the intrinsic chiral luminophore as a function of elapsed time after sample fabrication. The fluorene moiety containing chirality was used for an emitting layer (EML) and annealed thermally above its mesogenic temperature after coating on the rubbed alignment layer. The EML constructed the twisted structure without any treatment after cooling down at room temperature. The twisted EML generates the CP light, whose dissymmetric factor is governed by helical twisting power (HTP) and thickness of the EML. Interestingly, the dissymmetric factor (g
PL
) of the photoluminescence (PL) was gradually degraded according to time elapsed after sample preparation. These degradation behaviors were observed in both rapidly and slowly cooling processes. Such phenomenon is expected to be originated from weaker HTP of the intrinsic chirality than the specific chiral dopant such as S(R)05011 [15]. Restoring process of the dissymmetric factor was also investigated. Therefore, using this phenomenon, it can be applied to military security or various security displays.