A Self-Driven Synchronous Rectification ZCS PWM Two-Switch Forward Converter With Minimum Number of Components

A new soft-switching dual-switch forward converter with self-driven synchronous rectifier is presented in this article. The proposed converter operates under discontinuous conduction mode; therefore, compared with the two-switch forward (TSF) converter, one diode along with one inductor is removed from the output side. The leakage inductance of the transformer is employed to transfer the power from the input side to the output side. To provide the zero-current switching (ZCS) condition for all semiconductor devices in both
on
and
off
instants, a delay time between the
off
-command signals of main switches along with a capacitor is used as auxiliary circuit, which eliminates the required additional switch for soft switching. Moreover, the auxiliary circuit in addition to provide soft-switching condition, resets the transformer core, resonantly. Compared with the TSF converter with the help of the new auxiliary circuit, two reset diodes at the input side can be removed. The proposed converter is controlled with duty cycle using the pulsewidth modulation. Also, a winding is added at the output side of transformer to drive the
MOSFET
of synchronous rectification. Thus, a ZCS TSF converter with the minimum number of components is proposed. The operating modes of the proposed converter along with the design approach and the stress analysis are completely considered. To verify the theoretical results, a prototype is implemented and the theoretical results are compared with the experimental results.