Design and Analysis of InP/InAs/AlGaAs Based Cylindrical Surrounding Double-Gate (CSDG) MOSFETs With La2O3 for 5-nm Technology

The structural improvement and rapid production of InP, InAs (III-V, binary), and AlGaAs (III-V, ternary) compound semiconductor materials have invariably enabled its utilization in typical high-speed device applications. Using the electronic simulator tool, the ON- and OFF-state drain current (I
_ON
/I
_OFF
performance of InP/InAs/AlGaAs High Electron Mobility Transistors (HEMTs) with Lanthanum Oxide (La
₂
O
₃
) as a dielectric material has been analyzed. Thereafter, a design of cylindrical surrounding gate MOSFET has been planned with this novel heterostructures. The InAs spacer (primary) layer is placed as per requirement below the source and drains the terminal to improve mobility. A heavily doped AlGaAs channel layer is employed beneath the primary layer, followed by the required layers. The given device gate length of L
_G
=
5 nm
, source-drain device length
$L_{SD} =$

0.15

$\mu m$
and
$V_{GS} = V_{DS} =$

1

$V$
of InP/InAs/Al
_0.53
Ga
_0.47
As HEMT having Equivalent Oxide Thickness (EOT) of La
₂
O
₃
as
2 nm
(gate dielectric oxide), the measured values of maximum drain current (
$I_{D,max}$
), transconductance (
$G_{m}$
), Charge carrier density (
$\rho$
), and leakage current (
$I_{leak}$
) are
10 mA/

$\mu $
m
,
12 mS/

$\mu $
m
,
1.5 C/cm

³
, and
$0.03 ~\mu A/\mu $

m,
respectively. The electrostatic potential (
$\varphi$
) and electric field (
$E$
) are
2.58

$V$
and -
47.12

$V/\mu m$
are obtained when V
_DS
=
1

$V$
. This proposed design enhances the heterostructures immune to all the Short Channel Effects (SCEs) in the RF range that can be used in low power circuits design. Furthermore, the rotational cylindrical structure paves the way for a lesser board area to be occupied to reduce heat generation.