The Fault Re-decision Method based on the Different Decreasing Functions

The fault diagnosis method (FDM) is widely used in machine operation and maintenance. However, the wrong decision made by the FDM might cause the machine unnecessarily to shut down. To reduce the number of false alarms, this paper proposes a fault re-decision method based on the key-delay technology. The original data from sensors are inputted into the inner fault diagnosis method (IFDM) and the proposed method only employs the results from the IFDM as the input. Then according to the improved key-delay technology and comprehensive consideration of current result and previous results, the re-decision is given. To illustrate the proposed method, a case study on gear is presented in this paper, which shows that the proposed method does decrease the false negative rate.