A 0.32 nW–1.07 µW All-Dynamic Versatile Resistive Sensor Interface With System-Level Ratiometric Measurement

An ultra-low power, energy efficient, and versatile resistive sensor interface for energy constrained internet-of-things applications is presented. The sensor interface includes an efficiently duty-cycled current digital-to-analog converter (I-DAC) and an asynchronous successive approximation register (SAR) analog-to-digital converter (ADC), which enables a fully-dynamic operation. A fast start-up circuit is used in the duty-cycled I-DAC to speed up the start-up procedure and to minimize the energy consumption. A system-level correlated double sampling (CDS) technique is employed to suppress ADC offset and 1/
$f$
noise. To tackle the limited robustness against supply and temperature variations observed in a previous implementation of the sensor interface, a system-level ratiometric measurement (SRM) approach is employed in an updated design, which is described here in detail. The chip is fabricated in 65nm CMOS technology. Thanks to the all-dynamic nature, measurement rates from 0.1S/s to 12.5kS/s can be supported with an inherent scaling of power over 3 orders of magnitude. A reported lowest power consumption of 0.32nW is achieved at 0.1S/s. Adaptable resolution with efficient scaling of power can also be achieved by adjusting sensor interface settings and/or using oversampling and averaging. The achieved figure-of-merit (FoM), which ranges from 98 to 552fJ/conv-step is also the lowest among prior designs. Thanks to the SRM approach, only 3.6%/V and 21ppm/
$^\circ \text{C}$
supply and temperature sensitivity are obtained, respectively.