The Effect of Stray Capacitance to the Common Mode Current on Three-Phase System

The common-mode (CM) current phenomena is one of many problems in the EMC world due to the radiated magnetic field caused by it. A power transmission line with a delta-connection both generator and load normally do not have a connection to ground to establish a line for the return current. To determine the CM current, finding the stray capacitances to the ground is highly important because they are used as the return path for the CM current. In this paper, the investigation of predicting the CM current flowing through the stray capacitances will be done at a three-phase equivalent system of a wind turbine (WT). The wind turbine body is the place where the CM current flows, due to the stray capacitances between the power cables and the WT body around it. The CM current can be determined using the current magnitudes in a pointer-image method, which has a good agreement for CM current prediction and it might become a very useful tool applicable to measurements.