Choice – A Tunable PUF-Design for FPGAs

FPGA-based Physical Unclonable Functions (PUFs) have emerged as a viable alternative to permanent key storage by turning inaccuracies during the manufacturing process of a chip into a unique, FPGA-intrinsic secret. However, many fixed PUF designs may suffer from unsatisfactory statistical properties in terms of uniqueness, uniformity, and robustness. Moreover, a PUF signature may alter over time due to aging or changing operating conditions, rendering a PUF insecure in the worst case. As a remedy, we propose CHOICE, a novel class of FPGA-based PUF designs with tunable uniqueness and reliability characteristics. By the use of addressable shift registers available on an FPGA, we show that a wide configuration space for adjusting a device-specific PUF response is obtained without any sacrifice of randomness. In particular, we demonstrate the concept of address-tunable propagation delays, whereby we are able to increase or decrease the probability of obtaining 1’s in the PUF response. Experimental evaluations on a group of six 28 nm Xilinx Artix-7 FPGAs show that CHOICE PUFs provide a large range of configurations to allow a fine-tuning to an average uniqueness between 49% and 51%, while simultaneously achieving bit error rates below 1.5%, thus outperforming state-of-the-art PUF designs. Moreover, with only a single FPGA slice per PUF bit, CHOICE is one of the smallest PUF designs currently available for FPGAs.