An FPGA-based Hybrid Memory Emulation System

Hybrid memory systems, comprised of emerging non-volatile memory (NVM) and DRAM, have been proposed to address the growing memory demand of applications. Emerging NVM technologies, such as phase-change memories (PCM), memristor, and 3D XPoint, have higher capacity density, minimal static power consumption and lower cost per GB. However, NVM has longer access latency and limited write endurance as opposed to DRAM. The different characteristics of two memory classes point towards the design of hybrid memory systems containing multiple classes of main memory.In the iterative and incremental development of new architectures, the timeliness of simulation completion is critical to project progression. Hence, a highly efficient simulation method is needed to evaluate the performance of different hybrid memory system designs. Design exploration for hybrid memory systems is challenging, because it requires emulation of the full system stack, including the OS, memory controller, and interconnect. Moreover, benchmark applications for memory performance tests typically have much larger working sets, thus taking an even longer simulation warm-up period.In this paper, we propose an FPGA-based hybrid memory system emulation platform. We target the mobile computing system, which is sensitive to energy consumption and is likely to adopt NVM for its power efficiency. The focus of our platform is on the design of hybrid memory system, so we leverage the on-board hard IP ARM processors to enhance simulation performance while improving the accuracy of results. Thus, users can implement their data placement/migration policies with the FPGA logic elements and evaluate new designs quickly and effectively. Results show that our emulation platform provides a speedup of 9280x in simulation time compared to the software counterpart gem5.