Modified Grid-forming Converter Control for Black-Start and Grid-Synchronization Applications

The increasing grid integration of converter- based generation and distributed resources is necessitating a review to the classical synchronous generators dominant network models, and to equip converters with the necessary control capabilities such as inertia emulation and black-start to carry on the required ancillary services provision. This paper proposes a modified grid-forming converter control technique based on virtual synchronous machine (VSM). The modified controller uses a ramping voltage reference to achieve soft transformer energization and eliminate high-magnitude inrush current that can traditionally exceed converters rating. Grid-synchronizing functionality is added to the VSM controller to achieve smooth transition from black-start to grid-connected mode while maintaining grid-forming operation. This is achieved by gradually adjusting the power loop reference through a dedicated synchronizing controller, which is disconnected once grid-connection is achieved. A MATLAB/ Simulink case study is presented to illustrate the controller performance with a 40 MVA simulated converter. The results demonstrate successful black-start sequence execution, starting by soft transformer energization, followed by a block load pickup and grid-synchronization. The sequence is achieved with minimal transformer inrush current, and with seamless transition to the grid-connected operating mode.