Optimal Sizing of CPP-GMR Read Sensors for Magnetic Recording Densities of 1–4 Tb/in²

Several studies have confirmed that current-perpendicular-to-the-plane giant magnetoresistance (CPP-GMR) technology is appropriate for next-generation read sensors for ultrahigh areal densities (ADs) of data storage applications. Since the physical dimension of the read sensor is a crucial factor for developing the reader to overcome its limitations, this paper proposes an optimal sizing prediction of the CPP-GMR read heads for ADs of 1-4 Tb/in
²
. Micromagnetic modelling was performed in the simulations. The appropriate length of the stripe height (SH) and the read width (RW) of the readers was estimated based on a consideration of sensor outputs including the readback signal, asymmetry parameter, dibit response and power spectral density (PSD) profile. It was found that a variation of SH and RW lengths had an influential impact on the readback signal waveform. Those affectations were further characterized through the echoes of dibit response showing that shortening the SH length or increasing the RW length could improve the resolution and reduce the distortion occurring in the readback signal. Moreover, the PSD profile indicated that the reader operation became more stable at shorter SH lengths or longer RW lengths. The head response spectrum was also examined. In addition, the magnitude of the bias current was studied in relation to the head response. Lastly, the optimal physical dimension (SH
$\times $
RW) of the CPP-GMR readers for ADs of 1-4 Tb/in
²
was predicted to be (
$40 \times 48$
) nm, (
$28 \times 29$
) nm, (
$25 \times 26$
) nm and (
$19 \times 20$
) nm, respectively. The results can be utilized to design the CPP-GMR sensors at ultrahigh magnetic recording capacities.