Under-Sampling Digital Predistortion of Power Amplifier Using Multi-Tone Mixing Feedback Technique

An under-sampling digital predistortion based on a multi-tone mixing feedback technique (MTM-DPD) is presented in this article. In contrast to the under-sampling digital predistortion (DPD) based on conventional receivers, the proposed method could simultaneously reduce the sampling rate and acquisition bandwidth using a multi-tone mixing (MTM)-based feedback channel. The MTM-DPD is implemented with an evolved direct learning architecture, where the coefficients of a predistorter are estimated based on the aliased feedback signal, preprocessed input signal, and preprocessed kernels of the DPD model. To preprocess the input signal and kernels, the behavioral model of the MTM-based feedback channel and its corresponding identification algorithm are analyzed in detailed. Experimental results show that for a gallium nitride (GaN)-based power amplifier (PA) with 40-MHz input, under the excitation of a 17 tone LO signal with frequency interval 7.68 MHz, the MTM-DPD with sampling rate 15.36 MSPS and acquisition bandwidth 15.36 MHz could improve the adjacent channel power ratio (ACPR) from −30.1 to −46.5 dBc and the error vector magnitude (EVM) from 9.13% to 1.76%. Compared with the conventional full sampling DPD (FS-DPD), the MTM-DPD could reduce the cost of analog-to-digital converters (ADCs) in feedback channel significantly while maintaining satisfactory linearization performance.