PLL Based Method for Supraharmonics Emission Assessment

Supraharmonic (SH) disturbances are generated mainly by power electronics whose usage has increased significantly in the last decades. Consequently, supraharmonics have increased as well. The SH frequency range from 2 kHz to 150 kHz still lacks a normative measurement method. Compatibility levels and emission limits of SH are commonly presented as quasi-peak (QP) detector values for a bandwidth (BW) of 200 Hz measured by CISPR 16 receivers. In this context, this paper proposes an optimized method emulating the CISPR 16 receiver with QP detector for measuring grid disturbance levels. It makes innovative use of PLL (Phase-Locked Loop) units for estimating the highest distortion levels in the SH frequency range of the test signal, and in sequence, the QP detector with the appropriate specifications in the CISPR 16 standard is applied. Different cases of both synthetic and real signals were applied to the proposed method, which showed to be efficient in evaluating SH levels for current and voltage signals. An analysis of maximum permissible distortion levels is performed considering an individual SH distortion. In addition, the proposed method presents a computational cost reduction of approximately 91% in relation to the CISPR 16 method considering a specific case of signal containing SH distortions used for power quality analysis.