An Enhanced Resolution Brightness Temperature Product for Future Conical Scanning Microwave Radiometers

An enhanced spatial resolution brightness temperature product is proposed for future conical scan microwave radiometers. The technique is developed for Copernicus Imaging Microwave Radiometer (CIMR) measurements that are simulated using the CIMR antenna pattern at the L-band and the measurement geometry proposed in the Phase A study led by Airbus. An inverse antenna pattern reconstruction method is proposed. Reconstructions are obtained using two CIMR configurations, namely, using measurements collected at L-band by the forward (FWD) scans only, and combining forward and backward (FWD+BWD) scans. Two spatial grids are adopted, namely,
$3 \mathrm {\,\,km} \times 3 \mathrm {\,\,km}$
and
$36 \mathrm {\,\,km} \times 36 \mathrm {\,\,km}$
. Simulation results, referred to synthetic and realistic reference brightness fields, demonstrate the soundness of the proposed scheme that provides brightness temperature fields reconstructed at a spatial resolution up to ~1.9 times finer than the measured field when using the FWD+BWD combination.