In-memory Computation of Error-Correcting Codes Using a Reconfigurable HfOx ReRAM 1T1R Array

Error-correcting codes (ECC) are widely used during data transfer in wireless communication systems as well as in computer memory architectures. The error-correcting process is based on sending data with extra parity bits and decoding the received data for error correction. The first error detection and correction code, introduced in 1950, Hamming Code (7,4) is a linear error-correcting code able to detect and correct a single-bit error by encoding 7-bit data from 4-bit data, including 3 parity bits. Previous efforts using unipolar resistive random access memory (ReRAM) based in-memory computation of Hamming Code (7,4) resulted in 10
²
times lower power consumption compared to GPU and 10
³
times less than CPU-based computations. However further reduction of power consumption can be achieved by vector-matrix multiplication (VMM) using bipolar ReRAM arrays. In the VMM based approach, an encoding or decoding code matrix is stored in the array where it leverages the nonvolatile properties of ReRAM. With the VMM approach, the total number of computation cycles is not limited by the endurance of the ReRAM devices. Here we report the first experimental results of encoding and decoding Hamming code (7,4) using 1 transistor 1 hafnium oxide-based ReRAM (1T1R) arrays fabricated using 65nm CMOS technology. Our results show bipolar 1T1R arrays can correctly encode 4-bit message data to 7 bit encoded data as well as error position detection with overall 3 fold less power consumption than previously reported unipolar ReRAM crossbar array-based computation. Furthermore, we propose and simulate a peripheral circuit to convert the analog column output from a 1T1R array to single-bit binary output using the Cadence Spectre simulator. Our results pave the way for using a memristor-based fast and scalable hardware solution for encoding decoding of error-correcting codes