Dielectric Constant Estimation of Lunar Surface Using Mini-RF and Chandrayaan-2 SAR Data

A new dielectric constant estimation approach for the lunar surface using Mini-RF synthetic aperture radar (SAR) data and Chandrayaan-2 SAR data is presented in this work. Both the SAR systems are based on a hybrid-polarimetry (hybrid-pol) configuration that transmits a circularly polarized wave and coherently measures the backscattered wave by dual orthogonal linearly polarized channels. From the three-component hybrid-pol SAR decomposition technique, the ratio of the Fresnel reflection coefficients for horizontal and vertical polarization transmission can be estimated. This ratio, which is referred to as the co-polarization ratio, is used by the proposed methodology to find the real value of the dielectric constant. For performance validation, the proposed method is implemented on the Mini-RF hybrid-pol SAR data acquired over Apollo 17 landing sites. The values of the real part of dielectric constant are estimated for six different regions covering the collection sites of six Apollo 17 samples: 72 441, 73 241, 74 241, 75 081, 76 001, and 79 135. The results obtained using the proposed method are found to be in good agreement with the laboratory-measured results of the corresponding samples. Furthermore, the proposed methodology is also implemented on the Chandrayaan-2 hybrid-pol SAR data acquired over the
Biot crater
region. Various small areas possessing different possible surface characteristics, situated inside and outside the
Biot crater
, are being analyzed for validation.