A Self-Tuning S/S Compensation WPT System Without Parameter Recognition

In the application of wireless power transfer system, parameter drift of resonant tank is a general situation which induces natural frequency of primary side or secondary side deviates from switching frequency. This frequency deviation phenomenon will deteriorate load-independent constant current characteristics and decrease output power capacity for an S/S compensation system. This article illustrates the problems caused by frequency deviation through output characteristic analysis and addresses them by a self-tuning method based on switched capacitors (SCs). The proposed self-tuning method requires no resonant parameters such as compensation capacitance and coil self-inductance in advance. Primary and secondary natural frequencies can be both tuned to switching frequency continuously by SCs. The proposed method is verified by a simulation and a 500 W S/S compensation experimental prototype. After completion of self-tuning process, load-independent constant current characteristic is recovered and the output power capacity is boosted, which are in consistent with the theoretical analysis of system output characteristics. The proposed method is also applicable to
LCC
/S and
LCC
/
LCC
topologies.