Design of a Dual-Linearly Polarized Endfire Antenna

In this article, a dual-linearly polarized endfire antenna is proposed with high gain and stable radiation patterns. A double-sided slot array antenna (DSSAA) and a corrugated rectangular metal strip (CRMS) are employed to realize vertical and horizontal polarization (HP), respectively. Omnidirectional radiation pattern is obtained by etching transverse slots on both sides of the top and bottom metallic plates of a cavity. Based on the double-sided slot antenna, a DSSAA is proposed and fed by an air-substrate parallel strip line (PSL) for stable endfire radiation patterns. Then, the top plate of the DSSAA is reused as a CRMS for HP and compact size. To verify this concept, an all-metal prototype was fabricated and measured. Both the simulation and experimental results show that the DSSAA and the CRMS could offer the highest endfire gains of 12.5 and 12.9 dB, respectively, within a footprint of
$3.47\lambda _{0} \times 0.72\lambda _{0} \times 0.13\lambda _{0}$
(
$\lambda _{0}$
is the free-space wavelength at the center frequency). Moreover, an overlapping bandwidth of 7.6% is realized with
$\vert S_{11}\vert < -10$
dB, gain variation less than 3 dB. This work may provide useful references for designing dual-polarized endfire antennas with stable radiation patterns, high gain, and compact size.