Space Vector PWM Based DTC Scheme With Reduced Common Mode Voltage for Five-Phase Induction Motor Drive

In multiphase induction motor drives, lowering the common-mode voltage (CMV) reduces motor insulation degradation and the existence of destructive bearing current. For this investigation, a five-phase two-level voltage source inverter (FPTL-VSI) fed five-phase induction motor (FPIM) drive is used. FPTL-VSI produces increased CMV, which cannot be totally removed. Moreover, CMV can be reduced by 80% in contrast to its peak-to-peak value with suitable selection of small and large voltage vectors in a space vector pulsewidth modulation (SVPWM) scheme. Direct torque control (DTC) combined with the SVPWM scheme can accomplish such reduced CMV performance at constant switching frequency. To provide better speed and torque control, two virtual vector (VV) based SVPWM-DTC (DTC1 and DTC2) methods are proposed in this study. Over a wide range of modulation index, the influence of each voltage VV on motor drive speed and torque response is investigated. The proposed DTC1 and DTC2 schemes are validated under steady-state and dynamic conditions over a wide range of speed fluctuations using a high-power laboratory prototype of
$3.8\,\text{{k}W}$
FPIM drive. The efficacy of the proposed DTC1 and DTC2 is compared to the current literature by evaluating the effectiveness of CMV and the switching frequency.