Disturbance Rejection Analysis of a Droop-Controlled DC Microgrid Through a Novel Mathematical Modeling

DC microgrids are gaining interest by the increase in dc loads and renewable resource penetrations. Photovoltaic (PV) arrays are the primary renewable resources utilized in dc microgrids with variations in their productions. Power variations are seen as disturbances from other sources’ point of view. The droop control method is frequently used to control dc microgrids and assures power sharing among parallel-connected converters. It is of great interest to assess droop controller functionality in rejecting disturbances, and maintain constant output voltage. Therefore, there is a need for a comprehensive converter and controller modeling to study the effect of disturbances on the system behavior. In this article, the converter’s small-signal model is utilized in deriving the system state space model. Via the derived model, the effect of different circuit parameters on time and frequency responses is studied. The line resistances’ effect on the parallel operation of converters is also studied. To verify the droop controller’s functionality, the converter’s output impedance is derived. Disturbances are applied to the load current, and the system response is analyzed. Finally, the dc microgrid plug and play feature is addressed by proposing an algorithm for deriving the multiple converters’ mathematical model. Simulations and hardware-in-the-loop (HIL) experiments are conducted to verify the mathematical model and controllers’ performance.