FB-TCP: A 5G mmWave Friendly TCP for Urban Deployments

5G era opens a new horizon toward communication with new features and capabilities. The new mobile generation comes up with a multi-gigabit per second data rate along with its huge available bandwidths provided by millimeter-wave frequency bands. Dispensing a fully connected world throughout low latency is the supreme aim for 5G networks. However, attaining high-speed, reliable communication is challenging in the new generation, especially in scenarios with numerous obstacles such as the urban one. As the frequency rises, the signal's penetration power declines, which can mislead TCP in adjusting the sending rate because TCP cannot distinguish that a packet drop in a network is due to congestion or other shortcomings of the network such as blockage or random packet drops. This paper proposes a new TCP based on Fuzzy logic, which strives to prevent performance reduction in urban deployments. The Fuzzy rules are implemented in the congestion avoidance phase of the new protocol to adjust the sending rate intelligently and prevent blockage impacts. The ultimate aim of the protocol is to control the sending rate based on the current situation of the network so it can attain the highest possible performance. Moreover, it tries to reach its goal through low latency and keep the average sending rate as small as possible to restrain the buffer exhaustion. The extensive conducted simulations showed that the newly proposed protocol could attain higher performance compared to BBR, HighSpeed, Cubic, and NewReno in terms of throughput, RTT, and sending rate adjustment in the urban scenario.