Nonlinear Detector Response of Aqua MODIS Land Imaging Bands

The detectors in the Aqua Moderate Resolution Imaging Spectroradiometer (MODIS) reflective solar bands (RSBs) are calibrated assuming a linear relationship between the observed top-of-atmosphere radiance and the instrument output response. Any nonlinear behavior in the system response can contribute to errors in NASA’s Level 1B MODIS reflectance and radiance products, which are used in a wide variety of Earth science applications. While most RSB detectors continue to have very linear behavior even after more than 18 years of operation, we present evidence that the detectors in Aqua MODIS bands 1 (645 nm) and 2 (858 nm) have deviations from gain linearity that change over the mission by up to 3%. We show a clear divergence between gain measurements made with the onboard solar diffuser (SD) at two different radiance levels, achieved by collecting data both with and without an attenuation screen. Radiance trends from lunar calibrations and typical desert and ocean scenes are also compared. We present a simple method to characterize the response nonlinearity using a quadratic function by combining the results of the two sets of SD calibrations. Applying this quadratic calibration algorithm to the desert and lunar data results in improved agreement in their long-term radiance trends. A clear understanding of the magnitude of the gain nonlinearity could be useful to help improve the quality of numerous MODIS science products, including the land imaging applications that rely heavily on these bands.