A Systematic Design of a Compact Wideband Hybrid Directional Coupler Based on Printed RGW Technology

Printed ridge gap waveguide (PRGW) is considered among the state of art guiding technologies due to its low signal distortion and low loss at Millimeter Wave (mmWave) spectrum, which motivates the research community to use this guiding structure as a host technology for various passive microwave and mmWave components. One of the most important passive components used in antenna beam-switching networks is the quadrature hybrid directional coupler providing signal power division with 90° phase shift. A featured design of a broadband and compact PRGW hybrid coupler is propose in this paper. A novel design methodology, based on mode analysis, is introduced to design the objective coupler. The proposed design is suitable for mmWave applications with small electrical dimensions ( 1.2 λ
_o
×1.2 λ
_o
), low loss, and wide bandwidth. The proposed hybrid coupler is fabricated on Roger/RT 6002 substrate material of thickness 0.762 mm. The measured results highlight that the coupler can provide a good return loss with a bandwidth of 26.5% at 30 GHz and isolation beyond 15 dB. The measured phase difference between the coupler output ports is equal 90
^°
± 5
^°
through the interested operating bandwidth. A clear agreement between the simulated and the measured results over the assigned operating bandwidth has been illustrated.