Development of Coax Compacted Joint Assembly Process for the ITER Central Solenoid

The Central Solenoid (CS) is the core element of the ITER magnet system, contributed as in-kind procurement by the US Domestic Agency. Made up of six modular inter-exchangeable module coils, vertically stacked, forming a 15 m high and 4 m outer diameter solenoid, to be inserted inside the central tokamak core, after assembly of the 18 D-shaped Toroidal Field (TF) coils. Each module uses a Nb
₃
Sn conductor internally cooled by circulation of supercritical helium at 4.5 K and supplied, for each module, with a 45 kA current by the way of two vertical leads exiting from the module outer radius. The available space between the CS and TF magnets being very limited, the US DA has developed a compact - so called Coax Joint (CJ) - devoted to connect the respective twelve module leads to the feeders located at top and bottom of the CS via dedicated busbar extensions. The CS coax joint assembly procedure as developed by US DA would make use of CS assembly onsite soldering process, to be executed under supervision of the ITER Organization (IO) in the tokamak assembly hall. In order to mitigate risks related to these soldering activities needed at assembly stage, IO has proposed an alternative assembly process based on indium wires compaction - so called Coax Compacted Joint (CCJ)- and initiated its prototype development and qualification in time. The hereby presented CCJ design solution is based on four copper quadrants, each including an embedded straight Rutherford-type superconductor cable-strip to transport the current. The current is transferred from the lead to the quadrants by the way of compacted indium wires. A steel jacket welded around the joint ensures the mechanical support as well as the needed leak tightness. The paper describes developments made by CEA under IO supervision from the conceptual design to the testing of joints in relevant cryogenic and operative conditions.