The Magnetization of HTSC Tapes Stack in the Flux Pump Regime

In the present paper, the possibility of magnetization of HTSC tape by means of pumping by a local magnetic field is considered. Within the framework of the critical state model, the calculation of the density of the induced currents and the magnetization of a square (12 × 12 mm) fragment of a second-generation HTS tape (YBCO) was made. The model considers real dependence of the critical current density on the magnetic field and has been successfully tested previously. In the sample, the currents were induced by the impact of a local magnetic field. The size of the localized area of the external magnetic field to be considered was much smaller than the size of the HTS sample. It is showed that the repeated cyclical impact of the local outer field leads to the accumulation of the total magnetic moment in the sample up to a magnitude of 94% of the theoretical magnetization limit for this sample. The results obtained make it possible to optimize the mode of magnetization of a square fragment of a tape (or a stack of tapes) when implementing a magnetic flux pump. The experimental studies showed results comprisable well with theoretical ones.