A Gain-Reconfigurable and Frequency-Beam-Steerable Additively Manufactured Antenna

Due to the exponential growth of small satellite technology, novel shapes for antennas have been explored to make them low-cost, lightweight, compact, and easy to deploy. The use of frequency beam-scan antennas reduces the complexity of the small satellite front-end by avoiding the need to use phase shifters, especially when a reliable inter-satellite link (ISL) is required to keep up the communication and the formation accurately in a CubeSat swarm mission. This paper reports the design and a manufacturing process focused on in-space manufacturing (ISM) of a fully 3D-printed leaky-wave antenna, using ULTEM 9085 for aerospace applications. The antenna shows frequency beam steering capabilities from 4.4 GHz to 7.4 GHz, and a gain reconfigurable by angular rotation of the ground planes. The resulting antenna shows a measured peak gain of 10.07 dBi at 6.5 GHz, with a gain reconfigurability, as function of the elevation angle of the ground planes, in the range of 0 to 40°, providing an additional gain from 0 to 2 dBi, respectively.