Forest Height Estimation by Means of TanDEM-X InSAR and Waveform Lidar Data

Model-based forest height inversion from Pol-InSAR data relies on the realistic parameterization of the underlying (vertical) radar reflectivity function. In the context of interferometric TanDEM-X measurements - especially in the global single pol DEM mode - this is not possible due to the limited dimensionality of the observation space. In order to overcome this, the use of lidar waveforms to directly approximate the TanDEM-X reflectivity is proposed. This allows the forest height estimation from a single, single polarimetric, bistatic TanDEM-X acquisition. In order to extend the proposed lidar-supported inversion schema to areas only partially covered or sampled by (waveform) lidar measurements, the use of a “mean” (vertical) reflectivity profile is further proposed. This “mean” reflectivity profile is defined by means of the eigenfunctions of the available set of lidar waveforms. Both approaches are demonstrated and validated using TanDEM-X and airborne waveform lidar data acquired in the framework of the AfriSAR 2016 campaign over the Lopé National Park, in Gabon.