Single Longitudinal Mode Lasers by Using Artificially Controlled Backscattering Erbium Doped Fibers

In this work, we propose and experimentally demonstrate a new distributed short linear cavity fiber laser. At one of the cavity ends, fabricated by a commercial femtosecond fiber laser chirped pulse amplifier, an artificially controlled backscattering erbium doped fiber section has been connected. This distributed reflector acts also as a saturable absorber, leading to the generation of tunable and switchable single longitudinal-mode laser emissions. The distributed reflector consists of 9 micro-drilled sections of about 1cm each one and randomly spread throughout 2 meters of highly doped erbium fiber. The total length of the fiber laser is 9.5 m and the laser shows a single mode behavior at all the emitted wavelengths. Using this new kind of reflecting saturable absorber, single and multiple single-mode emissions can be obtained. The achieved laser presents a pump threshold as low as 45 mW and shows up to 8 different single-mode emission lines with an optical signal to noise ratio of 45dB.