First-Order Sea Clutter Suppression for High-Frequency Surface Wave Radar Using Orthogonal Projection in Spatial–Temporal Domain

The broadening first-order sea clutters caused by the signals from different directions with various radial current velocities create severe disturbance for target detection using high-frequency surface wave radar (HFSWR). Conventional sea clutter suppression methods tend to remove the sea clutter and target signals when they are mixed in the Doppler spectrum. Based on the characteristics of the target signal and sea clutter in spatial–temporal domain, a new first-order sea clutter suppression method for HFSWR using orthogonal projection is proposed. The proposed method uses the data from multichannels and slow-time domain at the adjacent range cell to construct a covariance matrix, which can be used to obtain the sea clutter subspace by eigendecomposition. Later, original signals are projected onto the sea clutter subspace. Finally, subtract the component of the original signals in the sea clutter subspace from the original signals to achieve the suppression of sea clutter by retaining the target signals. The simulation and experimental results for a single target and multiple targets cases indicate that the proposed method can suppress the first-order sea clutter effectively, which enhances the target detection capacity in the sea clutter zone for HFSWR.