Removal of Iron Oxide Scale From Boiler Feed-Water in Thermal Power Plant by Magnetic Separation-Separation Conditions of Oxygenated Treatment Scale

We have been developing the scale removal system utilizing superconducting magnet that can remove iron scale from boiler feed-water in a thermal power plant. The scale removal prevents the plants from the reduction in power generation efficiency. Iron oxide scale consists of the ferromagnetic and the paramagnetic particles, and the optimal separation conditions largely differ depending on the magnetic properties of the particles. So, single separation condition may cause the filter blockage by over capture or inadequate capture. We proposed the two-stage magnetic separation according to the magnetic properties of the aggregates, where the ferromagnetic particles are captured in the 1st stage in low magnetic field and field gradient, and then the paramagnetic ones are captured in the 2nd stage in high magnetic field and field gradient. It was shown that two-stage magnetic separation system for the mixture of ferromagnetic and paramagnetic particles is possible by utilizing one superconducting solenoidal magnet.