Passive Synthetic Aperture Radar Imaging Using Radio-Astronomical Sources

Recent work has demonstrated a passive radio sounding approach that uses the Sun as a source for echo detection and ranging. As the Sun is a moving source with a position that is known
a priori
, we evaluate this technique’s capabilities to measure the echo’s phase history, map topography, and perform synthetic aperture radar (SAR) focusing. Here, we present our approach to implementing passive SAR using a compact, temporally incoherent radio-astronomical source as a signal of opportunity. We first evaluate the passive system’s capabilities to obtain an echo from a rough surface by determining the critical signal-to-noise ratio (SNR) for reliably observing the Sun’s echo reflection with our passive instrument. We then demonstrate that our technique can detect the necessary changes in range, phase, and reflectivity of an echo from the Sun. We next present the experimental results of our passive radar testing using the Sun at Dante’s View, Death Valley, to highlight this technique’s ability to perform 2-D imaging. Finally, with synthetic data, we demonstrate that we can use time-domain backprojection to focus a planar white noise signal, perform passive SAR imaging, and improve the measurement’s SNR and azimuth resolution. The results of passive SAR focusing on white noise highlight the potential for the Sun and Jupiter’s radio emissions to perform surface and subsurface imaging for planetary and terrestrial observations.