Enabling Wireless Closed Loop Communication: Optimal Scheduling Over IEEE 802.11ah Networks

Industry 4.0 is being enabled by a number of new wireless technologies that emerged in the last decade, aiming to ultimately alleviate the need for wires in industrial use cases. However, wireless solutions are still neither as reliable nor as fast as their wired counterparts. Closed loop communication, a representative industrial communication scenario, requires high reliability (over 99%) and hard real-time operation, having very little tolerance for delays. Additionally, connectivity must be provided over an entire industrial side extending across hundreds of meters. IEEE 802.11ah fits this puzzle in terms of data rates and range, but it does not guarantee deterministic communication by default. Its Restricted Access Window (RAW), a new configurable medium access feature, enables flexible scheduling in dense, large-scale networks. However, the standard does not define how to configure RAW. The existing RAW configuration strategies assume uplink traffic only and are dedicated exclusively to sensors nodes. In this article, we present an integer nonlinear programming problem formulation for optimizing RAW configuration in terms of latency in closed loop communication between sensors and actuators, taking into account both uplink and downlink traffic. The model results in less than 1% of missed deadlines without any prior knowledge of the network parameters in heterogeneous time-changing networks.