IR-QNN Framework: An IR Drop-Aware Offline Training of Quantized Crossbar Arrays

Resistive Crossbar Arrays present an elegant implementation solution for Deep Neural Networks acceleration. The Matrix-Vector Multiplication, which is the corner-stone of DNNs, is carried out in O(1) compared to O(N
²
) steps for digital realizations of O(log
₂
(N)) steps for in-memory associative processors. However, the IR drop problem, caused by the inevitable interconnect wire resistance in RCAs remains a daunting challenge. In this article, we propose a fast and efficient training and validation framework to incorporate the wire resistance in Quantized DNNs, without the need for computationally extensive SPICE simulations during the training process. A fabricated four-bit Au/Al
₂
O
₃
/HfO
₂
/TiN device is modelled and used within the framework with two-mapping schemes to realize the quantized weights. Efficient system-level IR-drop estimation methods are used to accelerate training. SPICE validation results show the effectiveness of the proposed method to capture the IR drop problem achieving the baseline accuracy with a 2% and 4% drop in the worst-case scenario for MNIST dataset on multilayer perceptron network and CIFAR 10 dataset on modified VGG and AlexNet networks, respectively. Other nonidealities, such as stuck-at fault defects, variability, and aging, are studied. Finally, the design considerations of the neuronal and the driver circuits are discussed.