Non-Isolated High Step-Up DC/DC Converter With Coupled Inductor and Switched Capacitor

In this paper, a high-efficiency DC/DC converter with low voltage stress is designed for green power applications. The proposed non-isolated high step-up DC/DC converter combines the advantages of switched capacitors, coupling inductors, and voltage multiplier techniques. Adding the cells of the switched capacitor not only increases the voltage gain but reduces the voltage stress of the semiconductor devices. High voltage gain can be achieved by adding a coupled inductor method to adjust the turns ratio. When these are combined with a voltage multiplier circuit, the leakage energy of the coupled inductor is recirculated to the output terminal with lossless passive clamping performance. The leakage inductance of the coupled inductor controls the current dropping rate of the output diode turn OFF so that the reverse-recovery problem is mitigated. The proposed converter integrates these three techniques to achieve high voltage gain without operating at maximum duty cycle. In addition, switching loss reduction is realized through zero current switching turn ON soft switching performance with low voltage stress of semiconductor devices. Finally, this paper verifies the performance of the proposed converter for theoretical analysis by using a 35~45V input, 380V output, and 1kW power prototype circuit.