Waveform Design for Collocated MIMO Radar With High-Mix-Low-Resolution ADCs

Adopting low-resolution analog-to-digital converters (ADCs) for receive antennas of a multiple-input multiple-output (MIMO) system can remarkably reduce the hardware cost, circuit power consumption as well as amount of data to be transferred from RF components and the baseband-processing unit. However, an obvious performance loss is also expected. Towards this end, in this work we introduce a new architecture which contains both high- and low-resolution ADCs (named as high-mix-low-resolution ADCs) for collocated MIMO radar, and the associated problem of waveform design is discussed in detail. Specifically, the problem jointly optimizes the waveform, ADC switch vector and receive filter, so as to maximize the signal-to-interference-plus-quantization-error-and-noise ratio (SIQENR). To tackle the resultant nonconvex problem, an alternating optimization method (AOM) is devised. To be more specific, the ADC switch vector and waveform matrix are optimized with the block successive upper-bound minimization (BSUM) framework based on the Dinkelback method. Furthermore, a continuous and concave function is introduced to approximate the l
₀
norm to achieve a binary solution of the ADC switch vector. It is shown that the optimal solutions to the ADCs switch vector and waveform matrix can be efficiently attained by using the alternating direction method of multipliers (ADMM) approach and Karush-Kuhn-Tucher (KKT) conditions, respectively. Numerical simulations are provided to demonstrate the effectiveness of the proposed schemes.