Low-Frequency Distributed Acoustic Sensing for Early Gas Detection in a Wellbore

An unexpected and unwanted influx of gas or “kick” into the wellbore during hydrocarbon drilling can cause catastrophic blowout incidents, resulting in human casualties, ecological damage, and asset losses. The ability of the oil and gas industry to control gas kick depends on our ability to accurately detect and monitor gas migration in a borehole in real-time. This study demonstrates the application of optical fiber-based Distributed Acoustic Sensors (DAS) for early detection and monitoring of gas in wellbore. Multiphase flow experiments conducted in a 5000 ft. deep test-well are analyzed for different injection, circulation, and pressure conditions. In each case, the low-frequency component of DAS demonstrates a superior capability to detect gas signatures both inside the tubing and the annulus of the well, even at small gas volumes. In comparison, the high-frequency DAS data seems limited in detail. The gas influx velocity was calculated using the frequency-wavenumber analysis of the gradient of the low-frequency DAS phase with respect to time, which shows good agreement with theoretical velocity estimates using flow models and surface gauge measurements. This study demonstrates a novel workflow to analyze low-frequency DAS to qualitatively and quantitatively map gas influx in a wellbore.