Integrating Signals With High Sampling Rates for Transmission Line Protection in Digital Substations

Travelling wave based protection functions require significantly higher sampling rates than protection functions based on time-domain superimposed quantities or fundamental frequency phasors. Integrating these high sampling rates in digital substations leads to a significant increase of the communication load of process-level networks and causes high computational cost for centralized protection systems. This paper builds on a distributed signal processing approach, which allocates the filtering operations among standalone merging units (SAMU). In particular, the paper presents a decimation filter design to integrate signals with high sampling rates at the process-level. Thereby, signal sequences with high, medium and low sampling rates are provided according to the requirements of the respective protection function. The decimation filter structure is optimized with respect to time delay by the Remez exchange algorithm and with respect to computational cost by a multistage approach and a sparse filter design algorithm. In addition, the filter response is verified against the accuracy constraints defined in IEC 61869-6 and IEC 61869-13. The paper shows that it is feasible to distribute the filtering operations among SAMUs, while keeping the time delay below the maximum allowable processing delay of 2 ms.