A modified superconducting current injection transistor and distributed amplifier design

The authors have modified the design of the superconducting current injection transistor (Super-CIT) for use in a distributed amplifier. The super-CIT consists of a resistively damped long Josephson junction in which the maximum Josephson current is modulated by the magnetic field produced by current in a control line. The device is modified by DC-coupling the control line from the Josephson junction so that the Super-CIT can be embedded in a distributed amplifier configuration. The distributed amplifier design is used to raise the input impedance and the power gain of the amplifier over a wide bandwidth. The small signal current gain of the device can be increased by biasing the Josephson junction in an asymmetric configuration. A simulation using practical values results in an amplifier with an input impedance of 6.5 Omega using only four devices, which produces 15 dB of gain into a 2.5- Omega load over a bandwidth of 90 GHz with very little reverse gain.<>