Energy Generating Electronic Skin With Intrinsic Tactile Sensing Without Touch Sensors

Electronic skin (eSkin) with various types of sensors over large conformable substrates has received considerable interest in robotics. The continuous operation of large number of sensors and the readout electronics make it challenging to meet the energy requirements of eSkin. In this article, we present the first energy generating eSkin with intrinsic tactile sensing without any touch sensor. The eSkin comprises a distributed array of miniaturized solar cells and infrared light emitting diodes (IRLEDs) on soft elastomeric substrate. By innovatively reading the variations in the energy output of the solar cells and IRLEDs, the eSkin could sense multiple parameters (proximity, object location, edge detection, etc.). As a proof of concept, the eSkin has been attached to a 3-D-printed hand. With an energy surplus of 383.6 mW from the palm area alone, the eSkin could generate more than 100 W if present over the whole body (area ~1.5 m
²
). Further, with an industrial robot arm, the presented eSkin is shown to enable safe human-robot interaction. The novel paradigm presented in this article for the development of a flexible eSkin extends the application of solar cell from energy generation alone to simultaneously acting as touch sensors.