Dual-Frequency High-Electric-Field Generator for MRI Safety Testing of Passive Implantable Medical Devices

In this article, an electric (E) field generator is developed to generate uniform and high-strength E-fields at multiple frequencies. The system can be used to assess the radio frequency (RF) hazards of implantable medical devices (IMDs) in magnetic resonance imaging (MRI) environments. The novel system consists of three parts: 1) a signal generating and amplifying block; 2) a four-channel feeding network; and 3) a rectangular resonator box. Mixed modes are utilized to generate locally uniform E-fields inside the rectangular resonator at both 64 and 128 MHz. RF-induced heating for two passive IMD families are evaluated using both numerical and experimental methods inside the E-field generator. These results are compared with those obtained from standard American Society of Testing and Materials (ASTM) phantom testing. The results show that the novel E-field generator is capable of evaluating RF-induced heating for passive IMDs similar to that of the ASTM phantom. Furthermore, it integrates both 1.5- and 3-T RF-induced heating tests in a single system. It is much simpler compared to the ASTM test method which needs the RF coil as a source. Consequently, this small and efficient E-field generator can be used as an alternative system for RF-induced heating tests of passive IMDs in the MRI environment.