AWC 708C Laser Cutting Manual Learning Set

This research paper presents AWC 708C laser cutting manual learning set. It is a learning set which is relevant to high school courses and taught in a module (namely 30291 Creativity and Innovation). The researchers have developed a combination between the augmented reality technology and the AWC708C laser cutting learning kit to make them more attractive and reduce danger to users by adding additional security systems to the device. Also, it includes teaching how to use the machine through a designed worksheet to accompany with an augmented reality technology which is intended to be suitable for high school students in grade 10 (Mathayomsuksa 4). The results of this research found that overall quality of the AWC 708C laser cutting learning kit is in good quality level with average of 4.48±0.58. Outstanding results from an overall quality assessment are the convenience in preparing the equipment and the simple method of using the machine. Also, the quality level of the worksheet is in good quality level with average of 4.24±0.66. In addition, it was found that the results of the evaluation on satisfaction with the AWC 708C laser cutting machine learning kit is in very good level with average of 4.77±0.42. From the comparison of academic achievement between before and after using the learning set analyzed by t-test, it is found that the pre and post test scores of the sample groups had an average score of 5.50 and 8.96, respectively. From t distribution table which has df = 23, confidence value at 0.05 level with t = 2.707, the analysis result is 15.37 higher than the t distribution table. It is implied that the results of the pre-test achievement were different from the post-test achievement scores with significance level of 0.05. From the research hypothesis, it is found that those who studied with AWC708C laser cutting manual learning set had academic achievement after studied higher than before, according to the assumptions. Hence, in this research it can be concluded that the quality of the AWC 708C laser cutting machine learning kit can be increased.