Investigating Conditions for an Unexpected Additional Source of Partial Discharges in DC Cables: Load Power Variations

This paper has the purpose to investigate the variation of electric field inside a HVDC cable insulation, and consequent potentiality of partial discharge inception in a defect upon load current variation. Simulations carried out by COMSOL Multiphysics show that load variations can incept partial discharges during cable operation at a constant voltage, depending on insulating material characteristics, defect size and location, and, in particular, the temperature and field dependence of electrical conductivity. Different values for temperature and field dependency of electrical conductivity, as well as of thermal conductivity and heat capacity are considered and their effect on the field distribution inside cavities near inner and outer semiconducting layer analyzed. For this purpose, a new analytical model to predict the behavior of PD amplitude and repetition rate from cable energization to steady state, including load variation, is introduced. The likelihood of PD inception during load transients, and not only voltage transients as previously demonstrated, poses further attention and constraints to HVDC cable design.