Design of a multi-hole cylindrical extruder, driven by a linear actuator and used for the formation of bakery dough

The present work proposes a solution for the conditioning of bakery dough with the purpose of reducing costs by replacing manual work with a mechanized system that will be a piston extruder. In the process, the mass will be contained within a 304 stainless steel prismatic matrix with multiple outlet openings for optimization of the production line. The mechanical properties of bread dough were studied for the design of the platform and the estimation of the necessary compression force. A linear actuator was used, which exerts a compression force of 6 kN, which maximum linear speed is 5 mm/s. Validation of results will be carried out through simulated tests with a density mass of 1452.9 kg / m3. The system is composed of a linear actuator that performs the function of an extruder, followed by a pneumatic wire cutter. The process continues with a conveyor belt and ends with the injection of sesame seeds.The fundamental contribution is in the design of the extrusion chamber, since it allows the flow of the mass leaving minimal residue.