Rapid and Robust Adaptive Jaya (Ajaya) Based Maximum Power Point Tracking of a PV-Based Generation System

When subjected to partial shading (PS), photovoltaic (PV) arrays suffer from the significantly reduced output. Although the incorporation of bypass diodes at the output alleviates the effect of PS, such modification results in multiple peaks of output power. Conventional algorithms-such as perturb and observe (P&O) and hill-climbing (HC)-are not suitable to be employed to track the optimal peak due to their convergence to local maxima. To address this issue, various artificial intelligence (AI) based algorithms-such as an artificial neural network (ANN) and fuzzy logic control (FLC)-have been employed to track the maximum power point (MPP). Although these algorithms provide satisfactory results under PS conditions, a very large amount of data is required for their training process, thereby imposing an excessive burden on processor memory. Consequently, this paper proposes a novel optimization algorithm based on stochastic search (random exploration of search space), known as the adaptive jaya (Ajaya) algorithm in which two adaptive coefficients are incorporated for maximum power point tracking (MPPT) with a rapid convergence rate, fewer power fluctuations and high stability. The algorithm successfully eliminates the issues associated with existing conventional and AI-based algorithms. Moreover, the proposed algorithm outperforms other state-of-the-art stochastic search-based techniques in terms of fewer fluctuations, robustness, simplicity, and faster convergence to the optima. Extensive analysis of results obtained from MATLAB
^®
is done to prove the above performance parameters under static insolation conditions (using a three, four and a five-module series-connected PV system), under dynamically varying insolation (using a four-module series connected system), by changing the PV module rating (using a four-module series connected system) and using an IEC standard.