Tracking and erosion of HTV silicone rubber and suppression mechanism of ATH

Tracking and erosion of high temperature vulcanizing (HTV)-silicone rubber (SIR) and the suppression mechanism of alumina trihydrate (ATH) filler were investigated in the present study. The tracking and erosion resistance of HTV-SIR filled with 0 to 60%wt ATH was evaluated by employing an IEC 587 inclined plane (IP) tracking and erosion test, during which leakage current pulses on HTV-SIR were counted. Surface temperature distributions and the occurrences of thermal spots >400/spl deg/C also were observed by means of an infrared thermovision study. We employed thermogravimetry (TG)-differential thermal analysis (DTA)-mass spectrometer (MS) to observe the thermal degradation of unfilled and filled HTV-SIR in both air and argon. The test results indicate that 40%wt is a critical ATH level and whether tracking and erosion is allowed in the IP tracking and erosion test. Highly filling ATH (>40%wt) reduces the number of low unit silicone oligomer precursors which promote dry-band arcing as well as the presence of residual carbon which leads to carbonization. Chemical modifications of water vapor liberated from heated ATH to methyl groups, which occurs at the thermal decomposition temperature of silicone rubber, were found to result in the above process. The protection mechanisms of ATH for the tracking and erosion of HTV-SIR are formulated herein.