High current test facility for superconductors at Saclay

A high DC current (100 kA-design) test facility for superconducting material is under realisation. Aluminum stabilised conductor (as for LHC detectors) can be tested Including the stabiliser in a 4.75 T dipole field of 0.8 m length which can be rotated in both cable perpendicular directions. A superconductor transformer creates the high current with a primary current from -200 A to +200 A. The output power useable is 25 kJ so that junctions between cables or conductors can be measured at high current. Samples, with a cross sections up to 12 mm/spl times/30 mm, were 0.8 m long and were equipped with soldered cables of 0.4 m length at both ends. To test different samples without warming the dipole magnet, samples are placed in a separate dewar. The conception design is described and the first results without external dipole magnetic field are reported.